Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China     

YANG Peng  REN Zhanli  XIA Bin  TIAN Tao  ZHANG Yong  QI Kai  REN Wenbo 《《地质学报》英文版》2018,92(3):1157-1169

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.  相似文献   

Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China   总被引：1，自引：0，他引：1  

YU Mingjie  WANG Jingbin  MAO Qigui  FANG Tonghui  ZHANG Rui 《《地质学报》英文版》2018,92(5):1769-1783

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.  相似文献   

南海南部陆缘地质流体类型及其油气成藏意义          下载免费PDF全文

鄢伟  张光学  张莉  夏斌  杨振  雷振宇  林珍  钱星  骆帅兵 《中国地质》2018,45(1):39-47

南海南部陆缘蕴藏着非常丰富的油气资源。为了解南海南部陆缘流体活动系统以及与油气藏之间的关系,以高精度2D地震资料为基础,对南海南部陆缘流体活动系统的类型、地震反射特征、以及对油气成藏的意义开展了研究。在南海南部陆缘发现了多种流体活动系统,包括:泥底辟/泥火山、气烟囱、管状通道、与构造断层相关的流体活动系统。这些流体活动系统具有不同的地震反射特征,常常出现含气强振幅异常带、弱振幅杂乱反射带以及"下拉"或者"上拱"地震反射形态等流体活动系统的标志特征。流体活动系统受到构造运动和沉积因素的影响,并且与深部高温高压塑性流体密切相关,流体活动系统优先发育在地层薄弱部位。流体活动系统及所伴生的断裂和裂隙常常作为油气富集区的运输通道;并且流体活动系统所运移的强溶蚀性流体和深部热液流体有利于油气储层的形成,特别是对于碳酸盐岩储层的改造尤为明显。因此,流体活动系统不仅能作为油气运移通道,也可以改善储层,对油气成藏具有重要意义。  相似文献   

粤东南燕山期热隆伸展及其古水热系统——以恩平-新丰拆离断层为例          下载免费PDF全文

秦旭平  李德威  刘建雄  毛晨 《中国地质》2018,45(6):1188-1204

粤东南地区广泛发育燕山期NE-SW走向的拆离断层系统。文章对恩平-新丰拆离断层进行了野外地质调查和室内测试分析,重点研究了拆离断层之下韧性剪切带中的糜棱岩和拆离断层上盘与高角度脆性正断层伴生的硅化岩。初步认为,研究区热隆伸展构造于燕山早期开始形成,糜棱岩的变形温度在350℃左右,硅化岩内石英中气液包裹体的均一温度在155℃~326℃,盐度在2.74%~21.61% NaCl_eqv,平均盐度为11.17% NaCl_eqv,古热液流体沸腾时的温度在235℃~241℃,激光拉曼光谱分析结果表明,含硅热液的成分为富含Si、CO₂的NaCl-H₂O溶液。硅化岩流体包裹体的H-O稳定同位素组成表明古水热流体为岩浆水与大气降水混合作用的产物。沿着正断层分布的硅化岩可能是燕山期古水热型地热能的重要标志。燕山期热隆伸展构造系统及其深层与浅层相结合的古水热系统对认识现代地热能的类型、成因及其分布规律有一定的意义。  相似文献   

极地深部冰层取心钻探孔壁水压致裂研究          下载免费PDF全文

张晗  陈晨  Pavel Talalay  毛建设  刘书源  靳成才  宛召 《探矿工程》2018,45(11):5-11

为了维护极地深部冰层取心钻探工作中钻孔的稳定,避免孔内事故的发生,冰层孔壁的水压致裂问题是亟待解决的重要科学问题之一。本文在深入分析国内外冰层钻探资料的基础上,结合冰盖动力学相关理论,计算得出了钻孔所在区域冰层的密度、温度及内部应力随深度的变化规律。在此基础上,结合油气资源勘探水力压裂技术与冰层钻进钻井液等相关理论,建立了合理的孔壁压差计算方法,深入探讨了适用于深部冰层钻探孔壁水压致裂机理。研制了冰层钻孔水压致裂模拟实验装置,可分析研究不同围压条件下冰样的脆性变形机理。结合我国Dome A深冰心钻探工程实际,提出钻孔可能发生水压致裂的深度区域及孔壁所需的起始裂纹长度判定,以期为后续的安全高效冰层钻进提供重要的理论依据。  相似文献   

考虑方位漂移的水平井井眼轨道设计   总被引：1，自引：1，他引：0       下载免费PDF全文

王世栋  张志刚  耿雪樵  于彦江  陈奇 《探矿工程》2018,45(7):14-18

目前,深层页岩气水平井在钻井过程中经常出现方位漂移的问题,方位漂移严重影响了水平井的井眼轨迹控制,进而影响水平井的准确中靶。在现场施工中,通常根据施工区以前的钻井经验,在进行定向造斜时,先估计出一个“方位超前角”,这种现场的做法有着很大的不确定性,并且可能出现较大误差。本文提出了考虑方位漂移的水平井井眼轨道优化设计的方法,解决了仅凭现场经验给出的“超前角”不准确的问题。考虑方位漂移的水平井井眼轨道优化设计按照井段划分,将地层因素与井身剖面结合起来求取井段的平均方位漂移率。根据该方法研制开发了考虑方位漂移的水平井井眼轨道优化设计软件,并通过举例进行了验证,证明了方法是可行的。  相似文献   

页岩气基础地质调查皖南地1井钻探施工技术          下载免费PDF全文

刘文武  赵志涛  翁炜  朱迪斯  单文军  贺云超 《探矿工程》2018,45(10):66-70

皖南地1井是部署在安徽省南陵县烟墩镇的一口页岩气基础地质调查井。文章详细介绍了该井的钻探施工工艺技术以及遇到复杂问题的处理方法,并对钻效进行了分析,提出了实现优质高效钻探的措施。项目的顺利实施,梳理了皖南地区地层层序,为页岩气储层理论推测提供了有力的实物数据支撑和验证。  相似文献   

从成岩-蚀变特征探讨塔深1井白云岩储层成因     

尤东华  王亮  胡文瑄  钱一雄  王小林  陈强路  张军涛 《岩石矿物学杂志》2018,37(1):34-46

塔深1井钻遇的寒武系地层属于中寒武统阿瓦塔格组和上寒武统丘里塔格下亚群。阿瓦塔格组以灰色-深灰色粉晶-细晶藻白云岩为主,丘里塔格下亚群以灰色-浅灰色晶粒结构白云岩与残余亮晶结构白云岩为主。藻白云岩在阴极发光下以明亮的中等强度砖红色-桔黄色为主要特点,具有相对偏重的δ18O值(-6.3‰~-4.5‰,平均为-5.3‰,VPDB)、相对较高的稀土总量以及与正常海相碳酸盐岩相似的稀土配分样式。晶粒白云岩与残余亮晶结构白云岩在阴极发光下以偏暗的中等强度蓝紫色-砖红色为主要特点,具有相对偏轻的δ18O值(-9.2‰~-5.7‰,平均为-7.5‰,VPDB)、相对偏低的稀土总量、Eu正异常与重稀土明显亏损为特点的稀土配分模式。阿瓦塔格组和丘里塔格下亚群白云岩在上述岩石学特征和地球化学特征上的差异表明储层发育的成岩-蚀变过程存在差异。研究认为,埋藏较深的阿瓦塔格组优质储层的形成受多种因素控制,其中准同生期大气淡水作用下石膏结核的溶解及非稳定碳酸盐矿物的溶解奠定了基础,后期成岩改造及流体作用进行了强化,局部遭充填破坏。  相似文献   

地质导向技术在L型煤层气水平井 T-P05井中的应用          下载免费PDF全文

郭宝林  李琪  张兴龙  聂涛  于建克  李盟国 《探矿工程》2018,45(1):9-13

通过分析山西L型煤层气水平井的技术难点,着重建立造斜着陆与水平段导向两大导向模型,形成了以标志层划分与对比、地层倾角推算、地质建模和实时轨迹控制四个方面为主的L型煤层气水平井地质导向技术流程,该技术在T-P05井的成功应用,不仅丰富了煤层气水平井地质导向技术的内容与方法,更进一步验证了该技术在现场具有较强的可操作性和良好的应用前景,值得大力推广。  相似文献   

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策     

吕志凯  唐海发  刘群明  李小锋  王泽龙 《现代地质》2018,32(4):832

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。  相似文献